3Com OfficeConnect 3CXSH654B User Manual page 36

30 C 5: W
HAPTER INDOWS
Symptom
The LAN+Modem card fails to function
properly with SoftTex Card Services installed.
The LAN+Modem card fails to function with
SystemSoft Card Services installed.
16-bit card fails to function after installing
the LAN+Modem adapter.
NT
Solution
Make sure that you have the appropriate version of Softex installed for your
machine and that you are using the Softex drivers located on the installation CD
that shipped with the product.
SystemSoft version 4.10.13 was tested with the LAN+Modem card. It functions
fully except that modem capabilities are not hotswappable. Make sure that you
have properly installed the correct version of SystemSoft Card Services for your
computer.
Since the LAN+Modem card is a CardBus adapter, it disables the PCMCIA service
required for 16-bit adapters. To use a 16-bit adapter, click
Control Panel/Devices/PCMCIA and enable it on boot. This is not supported on
Toshiba machines using the Topic 95/97 controllers since the controller needs to
be in CardBus/16 to support the CardBus adapter. Windows NT 4.0 cannot
enable PCMCIA services when the controller is in CardBus mode. To work
around this, you can either set up multiple hardware configurations or choose a
16-bit multifunction PC Card.