Juniper CTP1000 Series Hardware Manual page 23

Table 1: CTP1002 Platform Specifications (continued)
Category
AC Input
Power required
AC line frequency
Nominal current (115V amps)
Power
Space Requirements
Airflow
Safety Agency Certification
Electromagnetic Emissions Agency
Certification
Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
Specification
100–240 VAC
50–60 Hz
<1.0
100 W
3 ft. (90 cm) behind device or rack.
Do not block air vents on the front or back of the device.
CTP 1002 is fanless.
AS/NZS 60950:2000 Safety of Information Technology Equipment
CAN/CSA-C22.2, No. 60950-1–03, First Edition, Information Technology Equipment
- Safety - Part 1: General Requirements
EN60825-1, Safety of Laser Products - Part 1: Equipment Class, Requirements,
and User's Guide (2001)
EN 60950-1:2001, First Edition, Information Technology Equipment - Safety - Part
1: General Requirements
IEC 60950-1(2001-10) Ed. 1.0 Information Technology Equipment - Safety - Part 1:
General Requirements
Low Voltage Directive (2006/95/EC)
UL 60950-1, First Edition, Information Technology Equipment - Safety - Part 1:
General Requirements
AS/NZS CISPR 22:2004
EMC Directive (89/336/EEC)
EN 300 132–2 (Narrowband and Wideband)
EN55022 Class A (CISPR-22 Class A)
EN55024, Annex C for WAN Equipment Performance Criteria A, B, and C
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-6
ETSI 300-386, Telecommunication Network Equipment; ElectroMagnetic
Compatibility (EMC) requirements
IECS-03 Issue 3 Class A
FCC Part 15 Class A
VCCI (Voluntary Control Council for Interference by Information Technology
Equipment)
CTP1004 Platform Specifications and Certification on page 14
CTP1012 Platform Specifications and Certification on page 15
Chapter 2: System Specifications
13