Juniper CTP1000 Series Hardware Manual page 44

CTP1000 Series Hardware Guide
Related
Documentation
34
WARNING: Be sure that circuit breakers for the power source are in the OFF
position before attaching power cables.
WARNING: Before servicing the device, turn off the power.
WARNING: Remove jewelry (including rings, necklaces, and watches) before
working on equipment that is connected to power lines. Metal objects heat
up when connected to power and ground and can cause serious burns or
become welded to the terminals.
CAUTION: Evaluate the overall loading of the branch circuit before you install
any equipment into a rack.
Federal Communications Commission (FCC) Statement on page 36
FCC Requirements for Consumer Products on page 37
Food and Drug Administration, Center for Devices and Radiological Health on page 37
Compliance with Canadian Regulations on page 38
Before You Install a CTP Platform on page 19
Copyright © 2015, Juniper Networks, Inc.