Table of Contents
Advertisement
32
C
4: I
HAPTER
NITIAL
Activating a
Network Profile
H
C
ANDSET
ONFIGURATION
Table 11
Advanced SIP Parameters
Codec:
Pkt Time (ms):
OutBand DTMF: The working of out-of-band dual-tone multifrequency.
5 Press
to confirm your settings.
After defining the SIP Account settings, you must associate the SIP
account with a particular network profile in order for the Wireless phone
to use these settings. To do this, you name the specific SIP account in the
Account Choice menu option of the active Network Profile. For details,
see "Entering the Network Profile Settings" earlier in this chapter.
Your Wireless Telephone can have up to six different network profiles
defined to support connections to different WLANs and/or SIP proxy
servers.
Only one network profile in your Wireless telephone can be active at a
time.
Follow these steps to activate the network profile you require for
operating your Wireless Telephone:
1 Press
Menu and then press
2 Enter the profile's password.
3 Select Network Profile to display the list of network profiles
4 Select the Network Profile you want to make active.
5 Press
Select and ensure that Auto Detect is set to On.
6 Select Move and press
top of the list.
7 Press
Back and then select Network Profile again. The active
profile in the list is indicated by check mark next to it. (If the profile has
Auto Detect set to Off the displayed icon will be indicated as
Return to Menu and go to Tools > Restart. Press
phone.
Compressed audio format.
Audio transmitting interval.
to move the profile you want active to the
to select the Profile.
OK to restart the
.)
Advertisement
Table of Contents
