Initial Handset Configuration; Configuration Overview - 3Com 3108 User Manual

Wireless telephone guide
Hide thumbs Also See for 3108:
Table of Contents

Advertisement

4
Configuration
Overview
I
H
NITIAL
ANDSET
This chapter is intended to assist the Wireless Telephone Installer or
person responsible for adding VoIP devices to the network.
Before you can operate the 3Com 3108 Wireless Telephone, you must
configure the parameters in the handset that allow the telephone to
communicate with the wireless network (WLAN) and SIP proxy server.
These settings require detailed information about the network to which
this handset is assigned. At a minimum, you will need to enter the IP
address and SIP registration settings for the handset. You may also need
to modify other settings in the handset that are required by the WLAN.
Additionally, the network administrator will need to configure the device
settings that are required by the wireless Internet Telephony Service
Provider (ITSP) or a corporate VoIP PBX system, such as the 3Com NBX®
System.
Approved Channels: Use of this product is only authorized for the
channels approved by each country.
To conform to FCC channel restrictions, only channels 1-11 are available
by default. If channels 1-13 are permitted for use in your country, please
visit the 3Com web site (www.3com.com) for the latest software version.
This chapter covers the following topics:

Configuration Overview

Entering the Network Profile Settings
Entering the SIP Account Settings
Activating a Network Profile
The 3108 Wireless Telephone's Profile menu allows you to view and
modify the handset parameters through the handset's built-in menu
interface. Menu selections are displayed on the handset's LCD display.
C
ONFIGURATION

Advertisement

Table of Contents
loading

This manual is also suitable for:

3c10408a

Table of Contents