Stablcal Rapidcal Calibration - Hach 2100Q User Manual

8.6.3 StablCal RapidCal calibration

1. Push the 2. Push the UP and
CALIBRATION key DOWN key to
to enter the access Cal Options
Calibration mode. and then select
Follow the Cal.Curve.
instructions on the
display.
Note: Gently invert
each standard before
inserting the standard.
16 English
3. Select StablCal 4. Insert the 20 NTU
RapidCal from the StablCal Standard
list and push OK. and close the lid.
Note: The standard to
be inserted is bordered.
5. Push Read. The 6. Push Done to
display shows review the
Stabilizing and then calibration details.
shows the result.