Table of Contents
Advertisement
Part
LCD SUS
SUS
Label
PC sheet
Back Cover
Body (surface)
PC-GF10
SC17
Camo White
Body (surface)
PC-GF10
Solid Black
Body (back)
PC-GF10
Logo
PC-GF10
Rubber gasket
Silicone
for water
proofing
Battery pack
Contacts
Au, Nickel
SC16
Body
PC
Label
PET
Water indica-
Paper + PET
tor label
External
Earphone mi-
Brass
1Seg an-
crophone jack
tenna cable
(metal part)
SC02
Earphone
LDPE, TPE
microphone
jack outer
cover, Connec-
tion plug outer
cover
Cable
HAOXIN
HFW2290-8006_
White
Connection
Brass
plug (metal
part)
Connection
LDPE, TPE
plug (resin)
Material
Surface treatment
-
Printing
UR coating
SF coating
-
Silk printing
-
JET polishing
Corrosion
INK
Laminated
Nickel plating and
Au plating
-
-
Nickel plating and
Au plating
-
Handling precautions
General
■ SC-01H is waterproof/dustproof, but do not allow water or dust
to seep into the terminal and do not allow accessories or optional
devices to get wet or dusty.
The battery pack, adapter, docomo nano UIM card and External 1Seg antenna
cable are not waterproof/dustproof. Do not use them in a humid place such as
bathroom or in the rain. If you carry your terminal on your body, perspiration may
corrode the internal parts of the terminal and cause malfunction. Note that if a
trouble is diagnosed as exposure to water or other liquid, repairs of the terminal
may not be covered by the Warranty or it may not be possible to repair such
phones. In that case, even if the repair is possible, repair charge is applied.
■ Clean the terminal with a dry soft cloth (such as used for cleaning eyeglasses).
• Rubbing it roughly with a dry cloth may scratch the display.
• Drops of water or dirt left on the display may cause stains.
• Do not use alcohol, thinner, benzene, cleaning detergent, etc. to clean the terminal.
These chemicals may erase the printing on the terminal or cause discoloration.
■ Clean the jacks occasionally with a dry cotton swab.
If the jack is soiled, connection gets worse and it may cause power to be
turned off or insufficient battery charge, so clean the jack with a dry cotton
swab etc. When cleaning, be careful not to damage the terminals.
■ Do not leave the terminal near the air conditioning vent.
Extreme temperature changes may produce condensation and corrode
the internal parts of the terminal, causing it to malfunction.
■ Make sure to use the terminal or battery pack without excessive force.
If you put the terminal in a bag full of items or sit down with the terminal in
the pocket of your clothes, it may damage the display, and internal circuit
board, and the battery pack and cause the terminal to malfunction.
Also, while the external device is connected to the external connection jack
or the headphone connection jack, it may cause damage and malfunction.
■ Do not rub or scratch the display with metal.
The display may get scratched and it may cause malfunction or damage.
■ Make sure to see the user's manuals supplied with each optional accessory.
Terminal precautions
■ Do not press display surface forcibly, or not operate with a sharp-
pointed objects such as nail, ballpoint pen, pin, etc.
Doing so may cause damage of display.
■ Do not use the terminal in extremely hot or cold places.
Use the terminal within a temperature range of 5℃ to 35℃ and a
humidity range of 45% to 85%. However, if the temperature is -20℃ to
50℃ , use is possible for a short period of time.
10
Contents/Precautions
Advertisement
Table of Contents
