Battery pack
• Attach/remove the battery pack after turning the power off.
• For attaching/removing the battery pack or back cover, hold the terminal
with hand not to damage the display, etc. And be careful not to press
[Power/Screen lock key] with your finger or hand.
• Do not bend/twist with excessive force to attach/remove the back
cover. The back cover may be damaged.
• Use Battery Pack SC16 for the terminal.
Attaching the battery pack
1
Hook a of the back cover with your fingertip, lift up a little
in the direction b and remove in the direction c
2
With facing the battery pack A mark up, align the convex
part of the terminal with concave part of the battery pack
correctly, press the battery pack to the direction a and
push to the direction b
Convex
part
a
b
c
Concave
part
b
a
3
Check the orientation of the back cover, and align it with the
camera part and then attach the back cover pressing parts
marked by ○ firmly so as not to make any gap
• To maintain waterproof/dustproof functionality, ensure there are no
gaps on any part of the terminal to attach it securely.
* For "Waterproofness/Dustproofness, Crashworthiness" → P.13
Removing the battery pack
1
Remove the back cover (P.18)
2
Hold the battery pack up in the direction of arrow mark
using the concave part of the terminal with your fingertip,
and then remove it
18
Press parts marked by
firmly and make sure
that there are no gaps
between the cover and
the terminal.
Concave
part
Getting started