Samsung Galaxy Active Neo Instruction Manual page 90

■ Setting sleep policy of Wi-Fi
You can set to disable Wi-Fi when the display of the terminal turns off or to
set always on when charging.
1
From the Home screen,
2
"MORE"
3
"Keep Wi-Fi on during sleep" → Select the setting
■ Installing a network certificate
Install a network certificate.
1
From the Home screen,
2
"MORE"
3
"Install network certificates"
■ Connecting Passpoint compatible access point automatically
Set whether to automatically connect to Passpoint-compatible Wi-Fi access
point within the area without the Wi-Fi access point set.
1
From the Home screen,
2
"MORE"
3
"Passpoint" → "On" → "OK"
■ Using static IP address
You can set the terminal to connect to Wi-Fi network using the static IP
address.
1
From the Home screen,
2
Tap Wi-Fi network to connect → Mark "Show advanced
options"
3
Tap "IP settings field" → "Static"
4
Set required items
• For using static IP address, enter the following items.
- IP address
- Gateway
- Network prefix length
- DNS 1/DNS 2
5
"CONNECT"
→ "Settings" → "Wi-Fi"
→ "Settings" → "Wi-Fi"
→ "Settings" → "Wi-Fi"
→ "Settings" → "Wi-Fi"
■ Using Wi-Fi Direct
You can exchange data by connecting Wi-Fi Direct compatible devices.
1
From the Home screen,
2
"Wi-Fi Direct"
3
Tap a detected device name
• When the connection is accepted on the searched device, the terminal
will be connected via Wi-Fi Direct and
■ Disconnecting Wi-Fi Direct
1
From the Home screen,
2
"Wi-Fi Direct"
3
Tap a device name to disconnect
Airplane mode
Disable all wireless connections.
1
From the Home screen,
2
Information
• Alternatively, press [Power/Screen lock key] for 1 second or longer
to display menu screen and tap "Airplane mode" to switch setting.
• If you enable "Airplane mode", Wi-Fi, Bluetooth, and functions of the
NFC such as reader/writer, P2P, etc. turn OFF. However, you can turn
them ON again during Airplane mode.
88
→ "Settings" → "Wi-Fi"
appears on the status bar.
→ "Settings" → "Wi-Fi"
→ "Settings" → "Airplane mode"
Settings