3Com 7757 Quick Reference Manual page 59

3Com Switch 7750 Family
Quick Reference Guide
network
Use the network command to advertise the network segment route to the BGP routing table.
Use the undo network command to cancel the existing configuration.
network-entity
Use the network-entity command to configure the network entity title (NET) for an IS-IS routing process.
Use the undo network-entity command to delete a NET.
nqa
Use the nqa command to create a NQA test group and enter NQA test group view.
Use the undo nqa command to delete this test group.
nqa-agent enable
Use the nqa-agent enable command to enable the NQA client function.
Use the undo nqa-agent enable command to disable the NQA client function.
nssa
Use the nssa command to configure an OSPF area as an NSSA area.
Use the undo nssa command to cancel the function.
ntdp enable
Use the ntdp enable command to enable NTDP globally.
Use the undo ntdp enable command to disable NTDP globally.
ntdp explore
Use the ntdp explore command to start topology information collection manually.
ntdp hop
Use the ntdp hop command to set a range (in terms of hop count) for topology information collection.
Use the undo ntdp hop command to restore the default range for topology information collection.
ntdp timer
Use the ntdp timer command to configure the interval to collect topology information.
Use the undo ntdp timer command to restore the default interval.
ntdp timer hop-delay
Use the ntdp timer hop-delay command to set the delay time for a switch to forward topology-collection
request packets.
Use the undo ntdp timer hop-delay command to restore the default delay time.
ntdp timer port-delay
Use the ntdp timer port-delay command to set the delay time for a port (on the device whose topology
information is collected) to wait to forward topology-collection request packets after the last port (on the device
whose topology information is collected) forwards topology-collection request packets.
Use the undo ntdp timer port-delay command to restore the default delay time.
ntp-service access
Use the ntp-service access command to set the right to access the local device service.
Use the undo ntp-service access command to cancel the access authority settings.
ntp-service authentication enable
Use the ntp-service authentication enable command to enable the NTP-service authentication
function.
Use the undo ntp-service authentication enable command to disable this function.
ntp-service authentication-keyid
Use the ntp-service authentication-keyid command to set an NTP authentication key.
Use the undo ntp-service authentication-keyid command to cancel the NTP authentication key.
network 1203
BGP view/BGP multicast address family view
System view
System view
OSPF Area view
System view, Ethernet port view
System view
System view
System view
System view
System view
System view
System view
IS-IS view
User view