Further Information; Obtaining Help - 3Com 7757 Quick Reference Manual

1146 administrator-address
Displaying Command Parameters
At the prompt, enter the name of the command followed by a space and
<sw7750
boot ?
The following parameters are displayed:
attribute-switch
boot-loader
bootrom
web-package
To specify boot loader, enter the command as follows:
<sw7750>
boot boot-loader ?
You only need to enter ? if parameters exist for the command.
Displaying Parent Menus
At the prompt, enter
quit
Displaying the User View Menu
Press <CTRL-Z>.

Obtaining Help

At the prompt, enter .
?

Further Information

For further information about how to use the command line interface, refer to the Command Reference Guide and
the Configuration Guide, which are both available as PDF documents on the CD that
Commands
administrator-address
Use the administrator-address command to set the MAC address of the management device on a
member device.
Use the undo administrator-address command to remove a member device from the cluster.
dhcp-snooping information vlan circuit-id
Use the dhcp-snooping information vlan circuit-id command to configure the content of the circuit
ID field in Option 82.
Use the undo dhcp-snooping information circuit-id command to restore the default.
display cluster
Use the display cluster command to display the state and statistics of the cluster to which the current switch
belongs.
flow interval
Use the flow-interval command to set the interval to perform statistics on port information.
Use the undo flow-interval command to restore the default interval.
Exchange the file main-attribute and backup-attribute.
Select a file to boot at the next time
Update Bootrom
Set web resource package
.
3Com Switch 7750 Family
Quick Reference Guide
. For example:
?
accompanied
the unit.
Cluster view
Ethernet port view
Any view
Ethernet port view