3Com 7757 Quick Reference Manual page 10

1154 cd
cd
Use the cd command to change the work directory on the remote FTP server.
cd
Use the cd command to change the current path on the remote SFTP server. If you did not specify the
remote-path argument, the current path is displayed.
cdup
Use the cdup command to go to the parent directory of the current directory.
cdup
Use the cdup command to return the current path on the remote SFTP server to the upper directory.
check region-configuration
Use the check region-configuration command to display the current MST region configuration,
including region name, revision level, and VLAN mapping table.
checkzero
Use the checkzero command to enable zero field check of RIP-1 packets.
Use the undo checkzero command to disable zero field check.
clock datetime
Use the clock datetime command to set the current date and time of the Ethernet switch.
clock summer-time
Use the clock summer-time command to set the name and time range of the summer time.
Use the undo clock summer-time to cancel the settings.
clock timezone
Use the clock timezone command to set the local time zone.
Use the undo clock timezone command to restore the local time zone to the default UTC (universal time
coordinated) time zone.
close
Use the close command to terminate an FTP connection without quitting FTP client view.
cluster
Use the cluster command to enter cluster view.
cluster enable
Use the cluster enable command to enable the cluster function on a switch.
Use the undo cluster enable command to disable the cluster function on a switch.
cluster switch-to
Use the cluster switch-to command to switch between the management device and member devices for
configuration and management.
cluster-mac
Use the cluster-mac command to configure a multicast MAC address for the cluster.
Use the undo cluster-mac command to restore the default multicast MAC address.
cluster-mac syn-interval
Use the cluster-mac syn-interval command to set the interval for the management device to send Switch
Clustering V2 multicast MAC synchronization packets periodically. You can only use this command on a
management device.
command-privilege level
Use the command-privilege level command to set the level of the specified command in a specified view.
Use the undo command-privilege view command to restore the level of the specified command in the
specified view to the default.
3Com Switch 7750 Family
Quick Reference Guide
FTP client view
SFTP Client view
FTP client view
SFTP Client view
MST region view
RIP view
User view
User view
User view
FTP client view
System view
System view
User view
Cluster view
Cluster view
System view