Filter Replacement - Field Controls Trio Plus User Manual

To increase the life of the air purifier, perform regular maintenance and care.
Before performing maintenance, be sure to shut down the air purifier and
unplug the power plug from the power source. After using the air purifier, if the
filter needs to be replaced, the Filter Replacement icon on the control panel
will flash, indicating the filter should be replaced. During the use of the air
purifier, it is recommended that the pre-filter be cleaned every three months to
extend the filter service life and dust removal effect. The filter set needs to be
replaced after 6 months of use.
All maintenance parts can only be inspected and provided
by our authorized service agency.

FILTER REPLACEMENT

Replace with Field Controls Trio Plus Filter Kit # 602604600
When cleaning the air purifier, please turn off the power first and clean it with a
soft, dry cloth. Do not use alcohol, gasoline, benzene or other chemical
solvents for cleaning.
After the filter has been used for a certain period, it will need to be cleaned or
replaced. The process is as follow.
Step 1 As shown in the figure, Step 2 First press the clasps of
with both hands on the upper the pre-filter down, releasing the
side of the machine, first pull frame. Then pull the pre-filter
the front case in the direction towards you, and finally lift the
of 1, then lift the front case in pre-filter upwards.
the direction of 2.
Step 4 Pull the tag of the carbon
Step 3 Pull the tag of the
filter to remove the filter from the
HEPA filter to remove the filter
appliance while keeping the PRO-Cell
from the air purifier
Catalyst in the air purifier.