Advertisement
FILTER REPLACEMENT
Replace with Field Controls Trio Pro Filter Kit # 602605600
Turn off the appliance and remove power cord from power supply before replacing filters.
The appliance will indicate when the filters require replacement, shown by the Filter
Replacement light indicator on the control panel. However, the life of the filter may
differ depending to the degree of pollution in the environment. The filter can be replaced
earlier if necessary.
To replace the filters, follow steps 1 through 6 on page 12 to page 13.
Filter
Pre-Filter
HEPA with Activated Carbon
In environments with poorer air quality the filters may need to be
replaced more frequently.
The used filter shall be disposed of as a non-combustible waste.
Clean/Replacement Period
Gently clean mesh screen with
vacuum cleaner once per month
The filter should be replaced
every 6 months
HEPA filters and activated carbon filters are best replaced every 3 to 6
months, depending on the use situation. High-efficiency HEPA filters,
activated carbon filters, photocatalyst filters, and pre-filters cannot be
washed.
REPLACEMENT OF UVC LAMP
WARNING – Skin or eye damage may result from direct exposure to the
light produced by the lamp in this appliance. Always shutdown and
disconnect the power before replacing or servicing.
Replace lamps with Field Controls Trio ProUV lamp replacement kit
Part Number # 602605500.
Replacement steps:
1. Turn the appliance off and unplug from power outlet.
2. Remove all the filters after opening front cover panel.
3. Remove the UVC lamps by rotating them 90 degrees.
4. Install new UVC lamps by inserting and rotating 90 degrees to lock in place.
5. Replace filters back into the air purifier.
6. Close front cover panel to complete installation
COMMON PROBLEMS AND SOLUTIONS
Problem
Possible Causes
The
If the power light is off, the
machine
unit is not correctly plugged
does not
in. Please confirm the plug
turn on
and socket connections.
There is a problem with the
Product
power connection;
works
The filter cover is not
abnormally
placed properly.
Fresh air
The plastic package of the
cannot be
new filter is not removed;
delivered
The air outlet of purified is
from the air
blocked by foreign matter.
outlet
smoothly.
Actions
Confirm the unit is
plugged in.Try
unplugging and
plugging in the unit.
Please check whether
the plug is inserted into
the socket and check
On/Off button status;
Re-install the filters.
Remove any packaging
from the filter.
Advertisement
