Sharp AQUOS SH-02L Instruction Manual page 72

2
Enter kuten code
z When the fourth-digit character is entered, the code
input character is displayed.
z After four-digit character is entered, the input mode
returns to the one that is used before using kuten
code.
Editing characters
„
Select characters to cut, copy, or paste.
1
In the character entry screen, enter a
character▶i
z Alternatively, in the character entry screen,
[Copy etc (Select area)] to select.
2
Select a start point▶t▶Select an end
point▶t
z To select all entered characters: C▶t
3
[Copy]/[Cut]
4
Select a point to paste
5
z▶[Paste]
z Press * for at least 1 second to paste immediate
copied/cut characters.
Deleting history
You can delete copied/cut characters.
1
In the character entry screen, z▶[Copy
history]
2
Point the cursor to a history
[Delete]
z To delete all: z▶[Delete all]▶[Yes]
3
[Yes]
Copied/cut characters can be recorded up to 10. If
z
the number of history items of cut and copied
z▶
characters exceeds 10, they are deleted from the
oldest one.
Entering a space
„
1
At the end of the character entry screen,
r
z Half-width space is entered regardless of input
mode. Half-width space is counted as one
character.
z To enter in text: Move the cursor▶#▶s▶select
full-width/half-width space
70
item▶z▶
Before Using the Handset