Security - Sharp AQUOS SH-02L Instruction Manual

Security

You can make settings for the security lock.
1
In the standby screen,
[Security]
2
Select an item
Security key setting: For details
„
"Security key setting"
Screen lock: Make settings for the unlock method
„
for when the power or the main display is turned on.
Restrict calls: For details
„
calls"
Advanced settings: For details
„
"Advanced settings"
[Screen lock]
If you enter wrong security keys five times
z
continuously, you cannot enter it for 30 seconds.
The setting items are as follows.
z
„ None: The lock screen is not displayed.
„ Lock No.: Set four- to sixteen-digit number.
„ Password: Set four- to sixteen-digit alphanumeric
and half-width symbols
more alphabets.
* Some half-width symbols are not available.
If you forget the lock number/password, contact a
docomo shop.
z▶[Settings]▶
☞
P. 157
☞
P. 154 "Restrict
☞
P. 157
* including at least one or
Unlocking when the handset starts up
When the screen lock is set to other than [None], you
z
can set whether to unlock the screen when the
handset starts up.
If unlocking the screen upon turning the power on and
z
you enter lock number/password incorrectly 10 times
and 20 times in a row, the handset will no longer
accept input until you turn the handset off and back
on. Entering incorrectly 30 times in a row will initialize
the handset. Use caution.
Restrict calls
You can set not to make calls.
1
In the standby screen,
[Security]▶[Restrict calls]
2
Enter the security key▶[Restrict calls]
If you have set Restrict calls, you need to enter the
z
security key to temporarily disable the restriction.
You can call to the emergency number (110, 119 or
z
118) even when you set Restrict calls.
154
z▶[Settings]▶
Handset Settings