Sharp AQUOS SH-02L Instruction Manual page 180

Using Bluetooth function
z To register/connect a Bluetooth device, the Bluetooth
passkey may need to be entered. Before starting the
registration, decide one- to sixteen-digit number. Enter
the same number on the handset and the other party's
Bluetooth device.
z Put the other party's Bluetooth device on stand-by
status beforehand and register it.
1
In the standby screen,
[Bluetooth]
2
[Bluetooth]▶Set to ON
3
[Pair new device]
4
Select a Bluetooth device▶[Pair]
z The confirmation screen for connection may be
displayed.
z Entering the Bluetooth passkey may be necessary
depending on the other party's Bluetooth device.
Also, some Bluetooth devices may start connection
after completing registration.
z Press C of a paired Bluetooth device to change
the name and the connection purpose of the other
party's Bluetooth device.
z▶[Settings]▶
You can connect up to 7 Bluetooth devices at the
z
same time. Bluetooth devices may not work properly
or the number of Bluetooth devices which can be
connected at the same time may differ depending on
the profile.
If you fail to connect a Bluetooth device, connection
z
may become available after re-registering it.
When the Bluetooth function is set to [ON], the
z
handset is set to receive registration requests/
connection requests from other Bluetooth devices.
Make the setting for displaying the handset's
information on other Bluetooth devices in advance to
allow the handset to be searched for by other
Bluetooth devices.
While in connection stand-by, even if a connection
z
request from a Bluetooth device is received,
connection may not be made depending on the signal
status etc.
For details on the operations of the other party's
z
Bluetooth device, refer to the instruction manuals of
the Bluetooth device to be used.
178 Data Communication