Keba ServoOne Device Help page 433

11 Alarms & warnings
ID No.: 0842.26B.5-01 Date: 09.2020
11.6.38.7 Error 40-6 (emergency code 7300h)
Cause: Tech-Option initialisation error
Suggested steps:
Error while loading dynamic software module
This issue is probably Save your parameter set for a later restore.
l
caused by an unsuitable
See 'history of parameter changes' and undo
l
parameter setting.
the latest changes.
Please check your parameter set for
l
implausible settings.
Please set device to factory setting, restart, and
l
see if the error occurs again.
When reporting this error to your service
l
partner, please include your device's
parameter setting.
11.6.38.8 Error 40-7 (emergency code 7300h)
Cause: Multi I/O communication error
Suggested steps:
Error in option communication
This issue is probably Save your parameter set for a later restore.
l
caused by an unsuitable
See 'history of parameter changes' and undo
l
parameter setting.
the latest changes.
Please check your parameter set for
l
implausible settings.
Please set device to factory setting, restart, and
l
see if the error occurs again.
When reporting this error to your service
l
partner, please include your device's
parameter setting.
ServoOne - Device Help 433