Huawei NE40E-X1 Hardware Description page 46

HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description
Interface
Name
AUX interface
USB interface
BITS clock
interface
RS485 interface RJ45
l
Table 2-11
Table 2-11 Attributes of the USB interface
Attribute
Connector type
Working mode
Standard
compliance
Table 2-12
Table 2-12 Attributes of the 10Base-T/100Base-TX/1000Base-T-RJ45 interface
Attribute
Connector type
Working mode
Standard
compliance
Cable
specification
Table 2-13
Issue 02 (2011-09-10)
Interface Type
RJ45
USB 2.0
RJ45
Attributes of the interfaces on the MPUG
lists the USB interface attributes.
Description
USB
High-speed or full-speed
USB 2.0
lists the 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes.
Description
RJ45
10M/100M/1000M auto-sensing, half-duplex or full-duplex
IEEE 802.3-2002
Category 5 unshielded twisted pair (UTP) cables recommended in the case
of 10 Mbit/s or 100 Mbit/s; super category 5 Shielded Twisted Pair (STP)
cables recommended in the case of 1000 Mbit/s
lists the console interface attributes.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 NE40E-X2 Hardware Description
Description
One AUX interface, used to connect to the
modem for remote maintenance through a
dial-up connection
One USB interface (USB 2.0 host interface),
for software upgrade
Two RJ45 interfaces, used to input 1588v2
time signals
Used to connect to the monitoring interface
on the external AC power supply module
38