Huawei NE40E-X1 Hardware Description page 45

Universal service router
Table of Contents

Advertisement

HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description
Table 2-9 Description of the buttons and indicators on the MPUG panel
Indicator/
Button
STAT indicator
ACT indicator
USB indicator
ETH LINK
indicator
ETH ACT
indicator
RST button
Table 2-10 Interfaces on the MPUG
Interface
Name
ETH interface
(10M/100M/
1000M Base-
TX auto-
sensing)
Console
interface
Issue 02 (2011-09-10)
Description
If the indicator is steady green, it indicates that the MPUG works
normally.
If the indicator blinks green, it indicates that the MPUG is being
registered.
If the indicator is steady red, it indicates that the hardware of the MPUG
is faulty.
If the indicator is off, it indicates that the MPUG is not powered on or
fails to be registered.
If the indicator is steady green, it indicates that the MPUG functions as
the master MPU.
If the indicator is off, it indicates that the MPUG functions as the slave
MPU or is not registered.
If the indicator is steady green, it indicates that a mobile storage device
is identified.
If the indicator blinks green, it indicates that a mobile storage device is
being accessed or written.
If the indicator is steady red, it indicates that a mobile storage device
cannot be identified or fails to be accessed or written.
If the indicator is off, it indicates that no mobile storage device is
connected to the USB interface.
If the indicator is steady green, it indicates that the ETH link is Up.
If the indicator is off, it indicates that the ETH link is Down.
If the indicator blinks yellow, it indicates that data is being transmitted.
If the indicator is off, it indicates that no data is being transmitted.
The button is used for resetting the MPUG. Pressing the RST button
resets the MPUG.
Interface Type
RJ45
RJ45
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 NE40E-X2 Hardware Description
Description
One ETH interface, for system maintenance
One console interface, used to connect to the
console for on-site configuration
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ne40e-x2

Table of Contents