Huawei NE40E-X1 Hardware Description page 24

HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description
Indicator/
Button
USB indicator
ETH LINK
indicator
ETH ACT
indicator
RST button
Table 1-10 Interfaces on the MPUG
Interface
Name
ETH interface
(10M/100M/
1000M Base-
TX auto-
sensing)
Console
interface
AUX interface
USB interface
BITS clock
interface
RS485 interface RJ45
l
Table 1-11
Issue 02 (2011-09-10)
Description
If the indicator is steady green, it indicates that a mobile storage device
is identified.
If the indicator blinks green, it indicates that a mobile storage device is
being accessed or written.
If the indicator is steady red, it indicates that a mobile storage device
cannot be identified or fails to be accessed or written.
If the indicator is off, it indicates that no mobile storage device is
connected to the USB interface.
If the indicator is steady green, it indicates that the ETH link is Up.
If the indicator is off, it indicates that the ETH link is Down.
If the indicator blinks yellow, it indicates that data is being transmitted.
If the indicator is off, it indicates that no data is being transmitted.
The button is used for resetting the MPUG. Pressing the RST button
resets the MPUG.
Interface Type
RJ45
RJ45
RJ45
USB 2.0
RJ45
Attributes of the interfaces on the MPUG
lists the USB interface attributes.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 NE40E-X1 Hardware Description
Description
One ETH interface, for system maintenance
One console interface, used to connect to the
console for on-site configuration
One AUX interface, used to connect to the
modem for remote maintenance through a
dial-up connection
One USB interface (USB 2.0 host interface),
for software upgrade
Two RJ45 interfaces, used to input 1588v2
time signals
Used to connect to the monitoring interface
on the external AC power supply module
16