Huawei NE40E-X1 Hardware Description page 25

HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description
Table 1-11 Attributes of the USB interface
Attribute
Connector type
Working mode
Standard
compliance
Table 1-12
Table 1-12 Attributes of the 10Base-T/100Base-TX/1000Base-T-RJ45 interface
Attribute
Connector type
Working mode
Standard
compliance
Cable
specification
Table 1-13
Table 1-13 Attributes of the console interface
Attribute
Connector type
Working mode
Electrical
characteristics
Baud rate
Data equipment
type
Cable
specification
Table 1-14
Issue 02 (2011-09-10)
Description
USB
High-speed or full-speed
USB 2.0
lists the 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes.
Description
RJ45
10M/100M/1000M auto-sensing, half-duplex or full-duplex
IEEE 802.3-2002
Category 5 unshielded twisted pair (UTP) cables recommended in the case
of 10 Mbit/s or 100 Mbit/s; super category 5 Shielded Twisted Pair (STP)
cables recommended in the case of 1000 Mbit/s
lists the console interface attributes.
Description
RJ45
Duplex Universal Asynchronous Receiver/Transmitter (UART)
RS-232
9600 bit/s (default value), which is configurable
Data Circuit-terminating Equipment (DCE)
8-core shielded cable
lists the AUX interface attributes.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 NE40E-X1 Hardware Description
17