Huawei NE40E-X1 Hardware Description page 74

HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description
Interface
NOTE
The FE0 to FE3 interfaces, and F1 interface support auto-adaptation to a straight-through network cable
or a crossover network cable.
Figure 3-7
RJ45(FIC, Supporting 1588v2).
Figure 3-7 Appearance of the Auxiliary Flexible Interface Card with 4-Port 100Base-RJ45(FIC,
Supporting 1588v2)
Panel Description
Table 3-33
100Base-RJ45(FIC, Supporting 1588v2).
Table 3-33 Description of the indicators on the Auxiliary Flexible Interface Card with 4-Port
100Base-RJ45(FIC, Supporting 1588v2)
Indicator
STAT
Interface Attributes
Table 3-34
100Base-RJ45(FIC, Supporting 1588v2).
Issue 02 (2011-09-10)
Type
shows the appearance of the Auxiliary Flexible Interface Card with 4-Port 100Base-
describes the indicators on the Auxiliary Flexible Interface Card with 4-Port
Description
If the indicator is steady green, it indicates that the card works normally.
If the indicator is off, it indicates that the card is not powered on or fails
to be registered.
If the indicator is steady red, it indicates that the hardware on the card
is faulty.
If the indicator is steady yellow, it indicates that logic is not loaded to
the card.
lists the interface attributes of the Auxiliary Flexible Interface Card with 4-Port
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Boards
Description
66