Page 5
Congratulations on your new wood-burning stove complete with a HWAM ® SmartControl We are pleased that you have chosen a HWAM woodburning stove and confident that it will give you much pleasure. The HWAM SmartControl is a digital control of the combustion in your new wood-burning stove. The purpose of the HWAM SmartCon- ®...
Be careful to make a good lighting with suitably dry wood, using kindling and lighting the fire in the top layers of kindling. It is important to achieve a high flue gas temperature quickly. When the door of the stove is opened HWAM ®...
Page 7
This will reduce the heat radiation from the stove and facilitate restoking without having to light up the fire anew. If the room temperature drops below the desired level, the ember phase will be shortened, and the HWAM ®...
leAning External cleaning Any maintenance of the stove should only be carried out when it is cold. Daily maintenance is limited to vacuum cleaning the stove externally, using the soft brush attachment. You can also dust the stove using a dry, soft cloth or brush. But remember, only when the stove is cold. Do not use water, spirit or any other kind of cleaner, as this will damage the lacquer.
In case the safety alarms go off, you must not use the stove. Contact your dealer as soon as possible. If problems occur that you cannot fix yourself, please consult your wood-burning stove dealer. eClArAtion oF erForMAnCe The DoP can be downloaded from our website via the following link: www.hwam.com/dop/5530ihs Page 10 of 12 pages...
Need help?
Do you have a question about the 5530 and is the answer not in the manual?
Questions and answers