HWAM 5530 User Manual
Hide thumbs Also See for 5530:

Advertisement

Quick Links

User manual
EN
5530
09.07.2020 / 97-9700
www.hwam.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5530 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for HWAM 5530

  • Page 1 User manual 5530 09.07.2020 / 97-9700 www.hwam.com...
  • Page 4 Clean Air Act 1993 including designation and supervision of smoke control areas and you can contact them for details of Clean Air Act requirements. The HWAM 5530 stoves detailed below have been recommended as suitable for use in smoke control areas when burning wood logs. Appliances recommended as suitable for use in Smoke Control Areas : •...
  • Page 5 Congratulations on your new wood-burning stove complete with HWAM SmartControl ® HWAM SmartControl is a digital control of the combustion in your new wood-burning stove. The purpose of HWAM SmartControl is to ® ® control the combustion in an environmentally optimal and economically efficient way, with a view to generating greater user comfort.
  • Page 6: F Iring Manual - Wood

    A successful combustion process requires that the wood is lit in the right way. A cold stove and a cold chimney challenge the combustion process. Be careful to make a good lighting with suitably dry wood, using kindling and lighting the fire in the top layers of kindling. When the door of the stove is opened HWAM ®...
  • Page 7 (heat loss). This might on the other hand result in a very cold chimney when the stove is lit. In certain cases it is necessary to assist the draught in the chimney by burning a couple of newspaper pages on top of the wood ready to be lit. Read more on www.hwam.com about the function of the chimney.
  • Page 8: I N General About Firing

    A good combustion is achieved ® when the fire gets the right amount of oxygen supply at the right time and place in the combustion chamber. HWAM ®...
  • Page 9: Maintenance

    leaning Cleaning the wood-burning stove The stove must be cold before you start cleaning it. Use a dry, soft lint-free cloth to dust off the painted surfaces. Do not use water, spirits or any type of detergent, as this will damage the paint. We recommend that the inside of the window should be cleaned with damp kitchen roll dipped in ash.
  • Page 10: Operational Problems

    In case the safety alarms go off, you must not use the stove. Contact your dealer as soon as possible. If problems occur that you cannot fix yourself, please consult your wood-burning stove dealer. eClaraTion oF erFormanCe The DoP can be downloaded from our website via the following link: HWAM 5530 www.hwam.com/dop/5530ihs Page 10 of 12 pages...
  • Page 11 Page 11 of 12 pages...

Table of Contents