Backwashable Filter System Setup - Water Depot ECONO Series Owner's Manual

Backwashable filter
Table of Contents

Advertisement

Backwashable Filter System Setup - Econo
Installers Displays & Settings (1-99 Days Between Regeneration option)
STEP 11D – From normal mode, press SET HOUR + UP buttons simultaneously for 3
seconds and release.
STEP 21D – Regeneration Time: Set the clock to the hour the regeneration should occur by using the
UP or DOWN buttons. An arrow points to PM after 12. Press SET HOUR to go to STEP 31D.
STEP 31D – Days to Regen: Set the number of days between regenerations. The allowable range is 1
to 99. Press SET HOUR to exit Installer Displays & Settings.
Installer Displays & Settings (7 day option)
STEP 117 – From normal mode, press SET HOUR + UP buttons simultaneously for 3
seconds and release.
STEP 217 – Regeneration Time: Set the clock to the hour the regeneration should occur by using the
UP or Down buttons. An arrow points to PM after 12. Press SET HOUR to go to STEP 317.
STEP 317 – Current Day of the week: Set the current day of the week by using
the UP or DOWN buttons (see chart at right for date codes). Press SET HOUR
to go to STEP 417
STEP 417 – Sunday Regeneration: To regenerate on Sunday use the UP or DOWN
Button until the arrow points to Regen. If the arrow does not point to Regen a
Regeneration will not occur on Sunday. Press SET HOUR to go to STEP 517.
STEP 517 – Monday Regeneration: To regenerate on Monday use the UP or DOWN
button until the arrow points to Regen. If the arrow does not point to Regen a regeneration
will not occur on Monday. Press SET HOUR to go to STEP 617.
STEP 617 – Tuesday Regeneration: To regenerate on Tuesday use the UP or DOWN
button until the arrow points to Regen. If the arrow does not point to Regen a
regeneration will not occur on Tuesday. Press SET HOUR to go to STEP 717.
STEP 717 – Wednesday Regeneration: To regenerate on Wednesday use the UP or
DOWN button until the arrow points to Regen. If the arrow does not point to Regen a
Regeneration will not occur on Wednesday. Press SET HOUR to go to STEP 817.
STEP 817 – Thursday Regeneration: To regenerate on Thursday use the UP or DOWN
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Platinum seriesBtc1Btc2Btmc1Btcp1Btcp2

Table of Contents