Tuner Features; K 2 I (Kenwood Inteligent Twin If); Selecting Tuning Mode; Tuning - Kenwood KDC-PS9060R Instruction Manual

Tuner features

(See page 6)
K I ( Kenwood Intelligent Twin IF)
2
When the frequency of another station is too close to that of
the station currently being listened to, interfering with proper
reception, this function automatically narrows the range of
received frequencies to prevent such interference.

Selecting Tuning Mode

You can choose from three tuning modes: auto seek, preset
station seek, and manual. The "AUTO 1" indicator lights up
when auto seek tuning is selected, and the "AUTO 2"
indicator lights when preset station seek tuning is selected.
1
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
2 Press the ¢ button repeatedly until the tuning function
appears in the display.
Press the 4 button to search in the other direction.
The tuning method is displayed as "AUTO 1", "AUTO 2", or
"MANUAL" referring respectively to auto seek tuning, preset
station seek tuning, and manual tuning.
3
Switching settings
Press either the AM button or FM button to switch the tuning
mode.
The display and setting will change.
4
Press the MENU button to end the menu mode.

Tuning

1
Press the SRC button repeatedly until the tuner mode is
obtained. "TUNER" is displayed only when the tuner mode is
selected.
2
Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches
between the FM1, FM2 and FM3.
Press the AM button to select the MW and LW bands.
3
• Auto Seek Tuning
Press the ¢ button to seek increasing frequencies.
Press the 4 button to seek decreasing frequencies.
• Preset station seek tuning
Press the ¢ button to move to the next preset station (i.e.,
the one with the next highest number), and the 4 button to
move to the last preset station (i.e., the one with the next
lowest number).
NOTE
If the frequencies stored at the preset numbers receive
stations which were not originally memorized when traveling
long distances, the preset number is not displayed. In such
cases, pressing the 4/¢ button to use preset station
seek will receive channel 1.
• Manual Tuning
Press the ¢ button to increase the frequency by one step.
Press the 4 button to decrease the frequency by one step.
NOTE
The ST indicator lights up when stereo broadcasts are being
received.
— 12 —