Switching Display For Discs; Direct Track Search - Kenwood KDC-PS9060R Instruction Manual

Disc control features

Switching Display for Discs

Switch the display that appears whilst discs are playing.
Switching Display for Discs:
Each time you press the DISP button, the display during disc
play switches as follows.
Track time
Total disc playing time (CD only)
Disc name
Disc title (Units featuring CD text/MD only)
Track title (Units featuring CD text/MD only)
Clock (KDC-8060R/7060R only)
NOTE
• Disc title/track title cannot be displayed with the CD mode of
the KDC-7060R.
• You can give names to discs through the presetting disc name
function (see p.24).
Note that depending on the unit, display may not be possible.
• If you try to display the name of a disc that does not have one,
"NO NAME" is displayed instead.
• Only when the Switching Clock display function (P.31) is on, the
clock is displayed.
• When there is an attempt to display the title of a disc for which
the disc title/track title has not been recorded, "NO TEXT" is
displayed for CD and "NO NAME" is displayed for MD.
• Depending on the type of characters of the CD Text, some
characters may not be displayable.
(See page 7)
Function of remote control with number/letter entry buttons

Direct Track Search

Using the remote control, make direct input of the track
number that you want to listen to.
1
Using the numeric buttons on the remote control, enter the
number of the track that you want to listen to.
The selected track number blinks in the display for 10 seconds.
If you make no further input in the 10-second period, the
number entry mode will automatically be cancelled.
2
Press either the TRACK
number is blinking.
The track specified in step 1 starts playing.
Cancelling Direct Track Search During Its Operation:
Press the 38 button.
NOTE
You cannot use the direct track search function whilst doing track
or disc scans or using random or magazine-random play.
— 26 —
(See page 8)
+ –
or TRACK button whilst the track