Text Scroll - Kenwood KDC-PS9060R Instruction Manual

• Discs are identified by their total length and number of tracks. If
another disc happens to have the same specifications as one
that you have already stored a name for, the name will be
displayed for it, too.
• If you want to change the name of a disc, repeat steps 1 and 2
to display the name, and then repeat steps 3 and 4 to input the
changes.
• Pressing the reset button erases the disc names stored in this
unit, but does not erase the names stored in a disc changer.

Text Scroll

This function permits the text to be scrolled and the entire
text to be displayed. Switching between manual scrolling and
automatic scrolling is permitted. The factory default is manual
scrolling.
To scroll manually:
1
Press the DISP button to display the disc title or the track title.
2
Holding down the DISP button for one second or more results
in one scrolling display of the titles.
Manual/Automatic scroll switching:
1
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
2
Press the ¢ button repeatedly to switch the function to be
set to the text scroll function.
Pressing the 4 button results in the functions being
switched in the reverse order.
The text scroll function is displayed with "SCROLL MANU" or
"SCROLL AUTO".
"SCROLL MANU" (Manual scrolling)
"SCROLL AUTO" (Automatic scrolling)
3
Switching settings
Press either the AM or FM button.
The display and setting will change.
4
Press the MENU button to end the menu mode.
To scroll automatically:
1
Press the DISP button to display the disc title or the track title.
The titles will be displayed in one scrolling display.
NOTE
When the disc or track to be played changes, the title is
displayed in one scrolling display.
2
Holding down the DISP button for one second or more results
in one scrolling display of the titles.
NOTE
Only units with a CD text feature permit title display.
— 25 —