Basic Operations Of Steering Remote Control - Kenwood KDC-PS9060R Instruction Manual

Basic operations of steering remote control

Optional for the KDC-7060R
2WARNING
To prevent accidents, do not attempt to use the steering remote
control whilst turning the steering wheel.
Replacing the Lithium Battery:
Use one lithium battery (CR2025).
Insert the battery with the
poles aligned properly, following
the illustration.
2WARNING
Store unused lithium batteries out of the reach of children.
Contact a doctor immediately if the battery is accidentally
swallowed.
All Modes
• SRC button
Each time you press the SRC button, the mode switches as
follows:
Tuner mode
CD mode
Disc control mode
NOTE
• The mode switches to the next mode from any mode which
cannot be used.
• The disc control mode will differ depending on the unit that is
connected.
• VOLUME buttons
Press the 5 button to turn the volume up.
Press the ∞ button to turn the volume down.
• ATT button
Turns down the volume quickly. To return the volume to its
original level, press the button again. Turning down the volume
all the way also cancels attenuation.
+ –
and
(See page 8)
Tuner Mode
• TUNE buttons
Press the 4 button to make decreasing seeks (using the
preset tuning mode).
Press the ¢ button to make increasing seeks (using the preset
tuning mode).
• FM button
Selects and switches between the FM1, FM2 and FM3 bands.
• AM button
Selects the MW and LW bands.
Disc Control Mode
• DISC buttons
Press the AM/DISC
backwards.
+
Press the FM/DISC
forwards.
• TRACK buttons
Press the 4 button to search through the tracks backwards.
Press the ¢ button to search through the tracks forwards.
— 36 —
–
button to search through the discs
button to search through the discs