Table of Contents
Advertisement
Varieties of settings for
Funttion
each function
————
CLK ON © mice
OFF
TL
Switching Clock Display
Time Rajustiaant (Manual}
<When Automatic Time Adjustment is off>
Automatic Time Adjustment
e enterd)
CLK
ADJ pe Adjustment
SYNC OFF ¢ SYNC ON
(KRC-PS656/605 Only}
Disabled System Indicator
DSI ON «© DSI OFF
TW
COL GRN © COL AMB
(KRC-PS655/605 Only}
TL
GRAP ON © GRAP OFF
(KRC-PS655/605 Only)
TL
BEEP ON@ eee OFF
SWPRE FeoSWPRE NF
N
(KRC-PS655. Only)
TL OFF © TION
SNS TROE
Only}
Selectable Hllumination
Switching Graphic Display
Touch:Sensor Tone
Switching Preout
Traffic Information Function
Clean Reception System Circuit
<!n FM reception of Tuner mode>
Text Scroll
KRC-PS855/605 <In FM, Disc changer mode>
KRC-S505<!n Disc changer mode>
CRSC ON i a OFF
SCL AUTO «SCL MANU
Make sure to end the menu mode when finished.
If you fail to end the menu mode, several functions may not
' operate properly, including the Traffic Information function,and
the Alarm function.
.
Tuner feautures (See page 6)
You can choose from three tuning modes: auto seek, preset
station seek, and manual. The "AUTO1" indicator lights up
when auto seek tuning is selected, and the "AUTO2" indicator
lights when preset station seek tuning is selected.
ysibu
Selecting Tuning Mode:
Press the AUTO button.
:
Each time you press the AUTO button, the mode switches as
follows.
AUTO 1
(Auto Seek Tuning)
v
AUTO 2
(Preset Station Seek Tuning}
v
MANUAL
(Manual Tuning)
Tuning:
;
1 Press the SRC button repeatedly to select the tuner mode.
"TUNER" is displayed when the tuner mode has been
selected.
2 Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches *
between the FM1, FM2 and FM3 (which are used for groups of
preset stations).
Press the AM button to select the AM band.
3 * Auto Seek Tuning
Press the m1 button to seek higher frequencies.
Press the kt
button to seek lower frequencies.
¢ Preset station seek tuning
Press the »i button to move to the next preset station (i.e.,
the one with the next highest number), and the ké button to
move to the last preset station (i.e., the one with the next
lowest number).
® Manual Tuning
Press the »1 button to increase the frequency by one step.
Press the kd button to decrease the frequency by one step.
The ST indicator lights up when stereo broadcasts are being
received.
.
11
Advertisement
Table of Contents
