Setup Support Mode; Switching Operation To Setup Support Mode (Setup Support Function) - IDEC WB1F Series User Manual

1. Overview 2. Installation & wiring
3. 3

Setup support mode

This mode is used to check the installation position and reading status of the WB1F.
Setup support mode has the following function.
Setup support function ........................................
z
3. 3. 1

Switching operation to setup support mode (setup support function)

There are two methods to switch to setup support mode.
Use the methods according to the situation.
The indicator LEDs (red/orange/green) will all flash when you switch to setup support mode.
Method 1 You can switch to setup support mode with the Operation button.
For details, refer to
Method 2 You can switch to setup support mode with control commands.
For details, refer to
Function
F P. 3-31
F P. 3-30 "Detailed procedure using the Operation
F P. 5-6 "5. 5 Control commands
4. Support tool
button".
list".
5. Appendix
Setup support mode
RS-232 Type USB Type
3-29