1. Overview
2. Installation & wiring
3. 2. 2
Barcode reading
The barcode reading reads a barcode and outputs the reading results.
For barcode reading settings, refer to
z Barcode reading methods
There are three methods to start reading (reading request on).
Method 1
Push the Operation button.
Method 2
Input the "start barcode reading" control command.
Method 3
Turn on the external trigger input.
RS-232 Type
Non-voltage contact
Function
"3. 5 Configuration item table"
Indicator LED
(G)
(O)
(R)
Control command
Host device
Start barcode reading
USB Type
Gray: External trigger input
4. Support tool
-
F P. 3-39 "Barcode
Indicator LED
(G)
(O)
(R)
Indicator LED
(G)
(O)
(R)
Turn on the external
trigger input
5. Appendix
Slave mode
reading".
3-4