Setup; Installing The Support Tool; Uninstalling The Support Tool - IDEC WB2F Series User Manual

1 Overview
2. 2

Setup

2. 2. 1

Installing the support tool

To use the support tool, it must be installed on a computer. Do so with the following procedure.
Unzip the compressed "wb2f_support_tool_***_***_**-*.zip" file to the desktop or any desired location.
After you unzip the file, double-click "wb2f_support_tool.exe" in the "wb2f_support_tool_***_***_**-*" folder to run the
support tool. The support tool may not run correctly if the files in the folder are deleted or moved. (***_***_**-* indicates
the version number.)
2. 2. 2

Uninstalling the support tool

When you no longer need the support tool, it must be uninstalled from the computer. Do so with the following proce-
dure.
Delete the entire folder (including the files) that was created by unzipping the compressed "wb2f_support_
tool_***_***_**-*.zip" file. The support tool does not use the registry, so you will not need to delete any registry entries.
(***_***_**-* indicates the version number.)
2 Operational Check
2-2
3 Screen and Menu 4 Appendix
Setup