Graco REACTOR H-VR Operation page 29

9. Open gun fluid manifold valves A and B.
NOTE:
On impingement guns, never open fluid manifold valves
or trigger gun if pressures are imbalanced.
10. Disengage gun piston safety lock.
11. Test spray onto cardboard. Adjust pressure and
temperature to get desired results.
12. Equipment is ready to spray.
NOTE:
If you stop spraying for a period of time, the unit will
enter standby (if enabled). See page 30.
313539F
ti2414a
ti2410a
Spraying
29