Volume; System Q; Audio Control - Kenwood DPX502U Instruction Manual

General features

Volume

Increasing Volume
Turn the [VOL] knob clockwise.
Decreasing Volume
Turn the [VOL] knob counterclockwise.
Attenuator
Turning the volume down quickly.
Press the [ATT] button.
Each time you press the button, the Attenuator
turns ON and OFF.
When the Attenuator is ON, the "ATT" indicator
blinks.

System Q

Selecting the best sound setting preset for different
types of music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
When you press the button once, the current
sound setting is displayed.
Each time you press the button, the sound setting
alternates.
Sound setting
User memory
Rock
Pops
Easy
Top 40
Jazz
Natural
⁄
• User memory: The values set on the <Audio Control>
(page 8).
• Change each setting value with the <Speaker Setting>
(page 10).
First, select the speaker type with the Speaker setting.
|
8
English

Audio Control

1
2
3
4
5
Display
"USER"
"ROCK"
"POPS"
"EASY"
"TOP40"
"JAZZ"
"NATURAL"
Select the source to adjust
Press the [SRC] button.
Enter Audio Control mode
Press the [VOL] knob.
Select the Basic Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
Adjust the Basic Audio item
Turn the [VOL] knob.
Adjustment Item Display
Rear Volume "R-VOL"
Subwoofer level "SW L"
Bass level* "BAS L"
Middle level* "MID L"
Treble level* "TRE L"
Balance "BAL"
Fader "FAD"
Exit Audio Control mode (Volume control mode)
* You can adjust these items in detail. Refer to <Adjusting
the detail of Audio Control> (Page9).
* Source tone memory: Puts the set up value in the
memory per source. (Detail Audio item is included)
Exit Audio Control mode
Press any button.
Press a button other than the [VOL] knob and [ATT]
button.
Range
0 — 35
–15 — +15
–8 — +8
–8 — +8
–8 — +8
Left 15 — Right 15
Rear 15 — Front 15