Download  Print this page

Text Scroll; Built-In Auxiliary Input Setting; Power Off Timer; Cd Read Setting - Kenwood DPX502U Instruction Manual

Dual din sized cd receiver
Hide thumbs

Advertisement

Menu system

Text Scroll

Setting the displayed text scroll.
Display
Setting
"SCL MANU"
Doesn't scroll.
"SCL AUTO"
Scrolls when the display changes.
• The text scrolled is listed below.
- CD text
- Folder name/ File name/ Music title/ Artist name/
Album name
- MD title
- Radio text
In Standby mode

Built-in Auxiliary input Setting

Set the Built-in Auxiliary Input function.
Display
Setting
"AUX OFF"
When selecting the source there's no Auxiliary Input.
"AUX ON"
When selecting the source there's Auxiliary Input.
In Standby mode

Power OFF Timer

Setting the timer to turn this unit's power OFF
automatically when Standby mode continues.
Using this setting can save the vehicle's battery
power.
Display
Setting
"OFF – – –"
Power OFF Timer function is OFF.
"OFF 20M"
Turns the power OFF after 20 minutes.
(Original setting)
"OFF 40M"
Turns the power OFF after 40 minutes.
"OFF 60M"
Turns the power OFF after 60 minutes.
|
30
English
In Standby mode

CD Read Setting

When there is a problem with playing a CD with
special format, this setting plays the CD by force.
Display
Setting
"CD READ1"
Play CD and Audio file.
"CD READ2"
Play CD by force.
• Some music CDs may not play even in the "CD READ2"
mode.
Other than Standby mode

Audio Preset Memory

Registering the value setup by Sound Control. The
memory cannot be erased by the Reset button.
1
Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- <Audio Control> (page 8)
- <Audio Setup> (page 10)
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3
Select Audio Preset mode
Push the Control knob towards up or down.
Select the "A-PRESET" display.
4
Enter Audio Preset mode
Press the Control knob for at least 1 second.
5
Select the Audio Preset Memory
Push the Control knob towards up or down.
Select the "MEMORY" display.
6
Put the Audio Preset in the memory
Press the Control knob for at least 2 seconds.
The "MEMORY" display blinks 1 time.
7
Exit Audio Preset mode
Press the [MENU] button.
• Register 1 pair of Audio Preset Memory. You cannot
register by the source.
• When you press the Reset, all the sources will be the
setting value which is registered.

Advertisement

loading

  Also See for Kenwood DPX502U

  Related Manuals for Kenwood DPX502U

This manual is also suitable for:

Dpx502uy