Volume; Loudness; Ec4 (Sound Coordinate); Audio Control - Kenwood KRC-235 Instruction Manual

General features
Volum e
Increasing Volum e
Press the [u] button.
D ecreasing Volum e
Press the [d] button.
A t t enuat or
Turning the volum e dow n quickly.
Press the [ATT] button.
Each time the button is pressed the Attenuator turns ON or OFF.
When it's ON, the "ATT" indicator blinks.

Loudness

Com pensating for low and high tones during low volum e.
Press the [LOUD] button for at least 1 second.
Each time the button is pressed for at least 1 second the
Loudness turns ON or OFF.
When it's ON, "LOUD" indicator is ON.
ec4 (Sound Coordinat e)
You can recall the best sound setting preset for different types of
the m usic.
1
Select the source to set
Press the [SRC] button.
2
Enter Control mode
Press the [AUD] button.
3
Select the Sound type
Press the [#1] — [#5] button.
Press button Sound setting
[#1] Flat
[#2] Rock
[#3] Pops/ Top 40
[#4] Jazz
[#5] Easy
When the ec4(Sound Coordinate) setting is changed, the Bass and
Treble set in audio control replace the ec4(Sound Coordinate) values.
4
Exit Control mode
Press the [AUD] button.
A udio Cont rol
1
Select the source for adjustment
Press the [SRC] button.
2
Enter Audio Control mode
Press the [A.ADJ] button for at least 1 second.
3
Select the Audio item for adjustment
Press the [FM ] or [AM ] button.
Each time the button is pressed the items that can be adjusted
sw itch as show n below.
4
Adjust the Audio item
Press the [4] or [¢] button.
— 6 —
Display
"EC-1"
"EC-2"
"EC-3"
"EC-4"
"EC-5"