Download  Print this page

Removing The Unit - Kenwood DPX502U Instruction Manual

Dual din sized cd receiver
Hide thumbs

Advertisement

Removing the Unit

Removing the Hard Rubber Frame
(escutcheon)
Engage the catch pins on the removal tool 2 and
1
remove the two locks on the lower level.
Lower the frame and pull it forward as shown in
the figure.
2
When the lower level is removed, remove the
upper two locations.
• The frame can be removed from the top side in the same
manner.
Removing the Unit
1
Refer to the section <Removing the Hard Rubber
Frame> and then remove the hard rubber frame.
2
Remove the Hex-head screw with integral washer
(M4X8) on the back panel.
Insert the two removal tools 2 deeply into the
3
slots on each side, as shown.
4
Lower the removal tool towards the bottom, and
pull out the unit halfway while pressing towards
the inside.
• Be careful to avoid injury from the catch pins on the
removal tool.
5
Pull the unit all the way out with your hands,
carefully not to drop it.
|
38
English
Lock
Accessory2
Accessory2
Catch

Advertisement

loading

  Also See for Kenwood DPX502U

  Related Manuals for Kenwood DPX502U

This manual is also suitable for:

Dpx502uy