Table of Contents
Advertisement
Component Names and Basic Operations
Component Names and Basic Operations
Putting the unit in standby
1
Display the source/option selection
screen.
From the Home screen (page 3), touch as
follows:
2
Put the unit in standby.
On the source/option selection screen (page 11):
Turning off the screen
On the monitor panel
To turn on the screen: Press
the DISP OFF button on the
monitor panel or touch the
screen.
(Hold)
4
ENGLISH
On the pop-up menu
To turn on the screen: Touch the screen.
Adjusting the volume
You can adjust the volume (00 to 40)
by pressing VOL
J
pressing VOL
K
to decrease.
• When volume level is below 15,
holding VOL
J
volume continuously to level 15.
Attenuating the sound
On the source control screen:
To cancel attenuation:
Initial settings
When you power on the unit for the first time or
initialised, the <Initial Setup> screen appears.
Perform the initial settings.
Initial Setup
Demonstration
Language
Rear Camera
User Customize
to increase and
Viewing Angle
increases the
Once completed, Home screen appears.
<Demonstration> (page 36)
• ON (Initial): Activates the display demonstration.
• OFF: Deactivates the display demonstration.
<Language> (page 38)
Select the text language used for on-screen
information.
• English (American English)/English (UK) (Initial)/
Руccĸий/
Malaysia/Bahasa Indonesia
• GUI Language (Local (the language selected above)
(Initial)/English (UK)): Selects the language used for
displaying operation keys and menu items.
ON
OFF
English (UK)
Enter
Enter
Enter
Enter
Finish
/Türkçe/
/
/Bahasa
Advertisement
Table of Contents
