Download  Print this page

Kenwood DPX502U Instruction Manual page 36

Dual din sized cd receiver
Hide thumbs

Advertisement

Connecting Wires to Terminals
Connector Function Guide
Pin Numbers for
Cable Colour
ISO Connectors
External Power
Connector
A-4
Yellow
A-5
Blue/White
A-6
Orange/White
A-7
Red
A-8
Black
Speaker
Connector
B-1
Purple
B-2
Purple/Black
B-3
Gray
B-4
Gray/Black
B-5
White
B-6
White/Black
B-7
Green
B-8
Green/Black
|
36
English
Functions
Battery
Power Control
Dimmer
Ignition (ACC)
Earth (Ground)
Connection
Rear Right (+)
Rear Right (–)
Front Right (+)
Front Right (–)
Front Left (+)
Front Left (–)
Rear Left (+)
Rear Left (–)
2WARNING
Connecting the ISO Connector
The pin arrangement for the ISO connectors depends on
the type of vehicle you drive. Make sure to make the proper
connections to prevent damage to the unit.
The default connection for the wiring harness is described in
1 below. If the ISO connector pins are set as described in 2
or 3, make the connection as illustrated.
Please be sure to reconnect the cable as shown 2 below to
install this unit to the Volkswagen vehicles etc.
1 (Default setting) The A-7 pin (red) of the vehicle's
ISO connector is linked with the ignition, and the A-
4 pin (yellow) is connected to the constant power
supply.
Ignition cable (Red)
Unit
Battery cable (Yellow)
2 The A-7 pin (red) of the vehicle's ISO connector is
connected to the constant power supply, and the
A-4 pin (yellow) is linked to the ignition.
Ignition cable (Red)
Unit
Battery cable (Yellow)
3 The A-4 pin (yellow) of the vehicle's ISO connector
is not connected to anything, while the A-7 pin
(red) is connected to the constant power supply
(or both the A-7 (red) and A-4 (yellow) pins are
connected to the constant power supply).
Ignition cable (Red)
Unit
Battery cable (Yellow)
• When the connection is made as in 3 above, the unit's
power will not be linked to the ignition key. For that reason,
always make sure to turn off the unit's power when the
ignition is turned off.
To link the unit's power to the ignition, connect the ignition
cable (ACC...red) to a power source that can be turned on
and off with the ignition key.
A-7 Pin (Red)
Vehicle
A-4 Pin (Yellow)
A-7 Pin (Red)
Vehicle
A-4 Pin (Yellow)
A-7 Pin (Red)
Vehicle
A-4 Pin (Yellow)

Advertisement

loading

  Also See for Kenwood DPX502U

  Related Manuals for Kenwood DPX502U

This manual is also suitable for:

Dpx502uy