Download  Print this page

Adjusting The Detail Of Audio Control - Kenwood DPX502U Instruction Manual

Dual din sized cd receiver
Hide thumbs

Advertisement

Adjusting the detail of Audio Control

Among the Basic Audio items, you can adjust the Bass
level, Middle level, and Treble level in detail.
1
Select the Basic Audio item
Select the desired item to be set in detail from
followings;
• Bass level
• Middle level
• Treble level
For how to select Basic Audio items, see <Audio
Control> (page 8).
2
Enter Detail adjustment mode of Audio
Control
Press the [VOL] knob for at least 1 second.
3
Select the Detail Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4
Adjust the Detail Audio item
Turn the [VOL] knob.
Bass level
Adjustment Item
Display
Bass Center Frequency
"BAS F"
Bass Q Factor
"BAS Q"
Bass Extend
"B EX"
Middle level
Adjustment Item
Display
Middle Center Frequency "MID F"
Middle Q Factor
"MID Q"
Treble level
Adjustment Item
Display
Treble Center Frequency
"TRE"
5
Exit the Detail Audio Control mode
Press the [VOL] knob for at least 1 second.
Range
40/50/60/70/80/100/
120/150 Hz
1.00/1.25/1.50/2.00
OFF/ON
Range
0.5/1.0/1.5/2.0 kHz
1.0/2.0
Range
10.0/12.5/15.0/17.5 kHz
• When you set the Bass Extend to ON, low frequency
response is extended by 20%.
• You can exit the Audio Control mode at anytime by
pressing any button except for [VOL] knob and [ATT]
button.
|
9
English

Advertisement

loading

  Also See for Kenwood DPX502U

  Related Manuals for Kenwood DPX502U

This manual is also suitable for:

Dpx502uy