Datamax I-Class Mark II Operator's Manual page 44

D I SPLAYED I TEM
OPTim edia
MEDI A TYPE
DI RECT THERMAL
THERMAL
TRANSFER
MEDI A I NDEX TYPE
GAP
NOTCH
HOLE
BLACK MARK
CONTI NUOUS
LABEL LENGTH
04.00
MAXI MUM LABEL
LENGTH
8.00

Maxim um Label Lengt h should t ypically be 2.5 t o 3 t im es t he physical lengt h of t he label.
PAPER EMPTY
DI STANCE
0.25

When using clear or t ranslucent m edia, t his set t ing should be longer t han t he act ual label size.
LABEL WI DTH
x.xx
RI BBON LOW
OPTI ONS
RI BBON LOW
DI AMETER
0.50
PAUSE ON RI BBON
LOW
ENABLE
DI SABLE
Ch a pt e r 4 – M e n u Syst e m
Aut om at ically configures various print set t ings t o t he select ed m edia/ ribbon
com binat ion.
Select s t he m et hod used t o print labels and should be set according t o t he t ype
of m edia being used, where:
Set s use for m edia t hat is heat react ive t o produce an im age.
Set s use for m edia t hat requires a ribbon t o produce an im age.
Select s t he t op- of- form ( TOF) sensing m et hod used t o det erm ine t he leading
edge of t he label, where:
TOF will be recognized by sensing t he gaps in t he m edia. ( Default Set t ing)
TOF will be recognized by sensing t he not ches in t he m edia.
TOF will be recognized by sensing t he holes in t he m edia.
TOF will be recognized by sensing t he reflect ive ( black) m arks on t he underside
of t he m edia
No TOF sensing will be used; inst ead, LABEL LENGTH ( in Media Set t ings) is used.
Det erm ines t he lengt h of t he label ( 0 - 99.99 inches) when t he SENSOR TYPE is
set t o CONTI NUOUS, where:
I s t he default set t ing.
Set s t he dist ance ( 0 - 99.99 inches) t hat t he print er will feed m edia t o find TOF
( when t he Sensor Type is set t o GAP or REFLECTI VE) before a TOF Fault is
declared, where:
I s t he default set t ing.
Set s t he dist ance ( 0 - 99.99 inches) t he print er will at t em pt t o feed before an
Out Of St ock Fault is declared, where:
I s t he default set t ing.
Set s t he m axim um print able widt h. Obj ect s ext ending beyond t his set t ing will
NOT print , where:
Default set t ing is dependant on print er m odel.
Defines t he print er response when THERMAL TRANSFER m ode is select ed and t he
ribbon supply begins t o dim inish.
Set s t he ribbon supply t hreshold diam et er ( 1.00 - 2.00 inches) t hat will t rigger a
Low Ribbon Warning prom pt , where:
I s t he default set t ing.
Allows t he print er t o ent er a paused condit ion when Ribbon Low Diam et er is m et ,
where:
Pauses when a Ribbon Low Diam et er condit ion is det ect ed; t he PAUSE Key m ust
be pressed t o proceed wit h t he print j ob.
No act ion is required by t he operat or; print ing can cont inue unt il a Ribbon Fault
is declared. ( Default Set t ing)
I TEM D ESCRI PTI ON
3 8