Emerson Copeland EazyCool ZX Series Application Manuallines page 60

Code Description
E61 Min pressure alarm of superheating Not used
E62 High superheating alarm
E63 Low superheating alarm
E64 High room temperature alarm
E65 Low room temperature alarm
E66 Open door alarm
E67-E79 Reserved
E80 rtC warning, date error
E81 rtC warning, communication error
E82 Probe configuration error
E83 DI configuration error
E84 Compressor configuration error
E85 Injection probe configuration error
E86 EEPROM R/W error (manual)
E87-E99 Reserved
Table 34: Alarm code overview
AGL_Unit_ZX_A2L_E_Rev00
Cause Action
Not used
Not used
Not used
Not used
Warning signal only if rrd/G09 is "no"
If the door is open
Alarm and compressor trip if rrd/G09 is
longer than dSA/G53
"yes"
HW problem in the
Disable the rtC or change the board
board
HW problem in the
Disable the rtC or change the board
board
Injection EXV output
mode is selected, but Injection EXV will not work
no relevant sensors
HW problem in the
Change the board
board
Reset
Manual or automatic – see Action.
Automatically: as soon as the injection EXV is
properly configured.
55