Auriol HG06061A-US Operation And Safety Notes page 18

Corded operation:
Attach the power adapter plug
into the connector socket
nect the power adapter
Battery operation:
Open the battery compartment
by removing the battery compartment cover
Insert two type AA batteries into the battery compartment
as shown.
Close the battery compartment
Once the power supply has been established, the display will light
up and go through a brief check of the display elements.
The weather station will now attempt to connect to the outdoor sen-
sor. The reception symbol
panel
Note: If no outdoor temperature is displayed within around 3 min-
utes, the weather station will stop the reception search. The recep-
tion symbol
outdoor temperature panel
It is possible that no signal can be received due to the surrounding
buildings or because the distance is too great.
If you are unable to establish an automatic connection to the
outdoor sensor, you can do this manually:
Press and hold the – / CH button
18 US-EN
337765_1907_aur_Funk-Wetterstation_Content_US.indd 18
.
3
goes out and
flashes on the outdoor temperature panel
on the power adapter
16
on the weather station and con-
13
to an easily accessible outlet.
14
on the rear of the device
12
again.
12
flashes on the outdoor temperature
and are displayed on the
.
3
until the reception signal
9
14
.
15
12
.
3
13.01.20 10:19