Electric Connection; Connection Of The Electric Cable - Beko ARI 7757186301 Service Manual

The installer should obey the local electricty standarts.

5.3. Electric Connection

Connect the product to the mains supply protected by a fuse, in accordance with the
''Technical Features'' table.
• Electric cable damage can cause electric shock, short circuit or fire hazard.
• Electric cable should not be crushed, compressed or contact hot parts.
• If the electricity cable is damaged, it should be changed by an qualified electrician.
• Connection must be compatible with national procedures.

Network supply data should be the same with the type of product label.

Product type label is behind the product.
• Product's connection cable should be appropriate with the ''Technical Features'' table.
Electric shock hazard. Please disconnect the appliance from mains before installing.

5.4 Connection of the Electric Cable

1. If separating all mains supply poles is not possible, a separation unit (fuse, line safety
switch, contactor) with 3 mm contact distance should be connected with accordance to IEEE
guidelines.
Additional protection should be provided through residual current circuit breaker.
If a cable given is with the product;
2. Connect the cables for the single-phase:
TR | 9