Overheating Protection; Overflow Safety System; Precise Power Setting; Operating Noise - Beko ARI 7757186301 Service Manual

6 1,5
7 1,5
8 1,5
9 20 minutes
P (Booster) 5 minutes (*)
(*) The hob will drop to level 9 after
5 minutes

6.5.19. Overheating protection

Your hob is equipped with sensors ensuring protection against overheating. In case of
overheating active cooking zone may be turned off.

6.5.20. Overflow safety system

Your hob is equipped with overflow safety system. If there is any overflow that spills onto
the control panel, system will cut the power connection immediately and turn off your hob.
"F" warning appears on display during this period.

6.5.21. Precise power setting

Induction hob reacts the commands immediately as a feature of its operating principles. It
changes the power settings very fast. Thus, you can prevent a cooking pot (containing water,
milk and etc.) from overflowing even if it was just about to overflow.

6.5.23. Operating noise

Some noises may arise from the induction hob. These sounds are normal and a part of
induction cooking.
• Noise may increase in high temperature levels.
• Alloy of the saucepan can cause noise.
• In low levels, a regular on/off sound can be heard because of the operating principles.
• Noise can be heard if an empty saucepan is heated. When you put water or food in it, this
sound will disappear.
• The noise of the fan that cools electric system can be heard.
If the surface of the touch control panel is exposed to intense vapor, entire control system
may become deactivated and give error signal.
Keep the surface of the touch control panel clean. Erroneous operation may be observed.
Selected level may drop. However, this condition cannot be seen on the indicator.
TR | 21