How To Use The Hob; Graphics Of Induction Hob - Beko ARI 7757186301 Service Manual

Figure3:Single switch parallel resonance converter
Power circuit is supplied with rectified DC voltage. According to CFILTER value, characteristic
of supply voltage is defined. Every switching cycle, amplitute and shape of current which
flows over IGBT and coil is defined by supply voltage.

8.2 How to use the hob

There are 9 levels and boost level in this induction cooker model. If there is no vessel on the
cooking zone, " " symbol is displayed on the related cooking zone display. Every level has a
maximum working time. If overheating occurrs on the related zone, that zone is switched of
automatically. Residual heat on the zone is displayed as "h" or "H" symbol according to
temperature.
You can find detailed information in user manual.

8.3 Graphics of induction hob.

Graphics give system behaviour when water in the vessel is increasing from 25°C to 90°C.
Note:Graphics may change accoding to room temperature, weather condition and pressure
Note: For power information multiply graphic data with 10.
TR | 25