Before Installation; Installation And Connection - Beko BCT9031G User Manual

Product must be installed by a qualified person in
accordance with the regulations in force. The
manufacturer shall not be held responsible for
damages arising from procedures carried out by
unauthorized persons which may also void the
warranty.
m
Preparation of location and electrical
installation for the product is under customer's
responsibility.
1 The product must be installed in accordance
· ith all local electrical regulations.
m~~~!~i~~~a~~~odn~f~~~a~~
~~~c~
0
i'f ~~enot
have it installed.
Damaged products cause risks for your safety.
Minimum height to extractor as recommend in
extractor instruction manual
Minimum distance between cabinetry must be
equal to width of hob
Installation and connection
• The product must be installed in accordance with
all local electrical regulations.
Before installation
The hob is designed for installation into commercially
available work tops. A safety distance must be left
between the appliance and the kitchen walls and
furniture. See figure (values in mm).
• It can also be used in a free standing position.
Allow a minimum distance of 750 mm above the
hob surface.
• (*) If a cooker hood is to be installed above the
cooker, refer to cooker hood manufacturer'
instructions regarding installation height (min
650 mm)
• Remove packaging materials and transport locks.
• Surfaces, synthetic laminates and adhesives
used must be heat resistant (100
°c
minimum).
• The worktop must be aligned and fixed
horizontally.
• Cut aperture for the hob in worktop as per
installation dimensions.
Do not install the hob on places with sharp
edges or corners.
. - . - • here is the risk of breaking the glass ceramic
surface!
Electrical connection
Connect the product to a grounded outleVline
protected by a miniature circuit braker of suitable
capacity as stated in the "Technical specifications"
table. Have the grounding installation made by a
qualified electrician while using the product with or
9/EN