Midea SO-BCD595WM-UT Service Manual
  1. Manuals
  2. Brands
  3. Midea Manuals
  4. Refrigerator
  5. SO-BCD595WM-UT
  6. Service manual
Midea SO-BCD595WM-UT Service Manual

Midea SO-BCD595WM-UT Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Service Manual
(The picture is only for reference, and specific appearance and configuration are subject to the real product)
Applicable models
SO-BCD595WM-UT
UL-BCD595WM-SQ
Prepared by
Reviewed by
Approved by
Service Manual, 2016-12
Model Code
22031020000462
22031020000113
R&D:Qing chunyu
QA:Li jiangli
SVC:Chen Lei
R&D:Geng Xiuhua
SVC:Guang Taoshuai
1 / 45

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SO-BCD595WM-UT and is the answer not in the manual?

Questions and answers

Related Manuals for Midea SO-BCD595WM-UT

Summary of Contents for Midea SO-BCD595WM-UT

  • Page 1 Service Manual, 2016-12 Service Manual Applicable models Model Code 22031020000462 SO-BCD595WM-UT UL-BCD595WM-SQ 22031020000113 (The picture is only for reference, and specific appearance and configuration are subject to the real product) Prepared by R&D:Qing chunyu QA:Li jiangli Reviewed by SVC:Chen Lei R&D:Geng Xiuhua...
  • Page 2 Manufacturers or distributors are not responsible for the content of the Manual and interpretation thereof. Midea Refrigerators Technical Maintenance Manual Copyright @2016 All rights reserved. Replication of all or part of the Manual in any forms shall not be allowed without written approval by the Overseas Sales Corporation of Midea Refrigerators. 2 / 45...

  • Page 3: Table Of Contents

    Service Manual, 2016-12 Contents 1.Safety Warning Code ............................5 1.1Warning for operation safety .......................... 5 1.2Safety instruction for refrigerant ........................8 2.Description for product features .......................... 9 3.Installation and commissioning ......................... 10 3.1Handling ..............................10 3.2Disassembly (None) ............................ 10 3.3 Installation location ............................ 10 3.4 Leveling of the refrigerator .........................
  • Page 4 Service Manual, 2016-12 8.7Display and main control panel(None) ......................29 8.8 Bar counter(None) ............................29 8.9 Water dispenser(None) ..........................29 8.10 Ice maker ..............................29 9. Function and operation ..........................36 9.1Operation panel ............................36 9.2 Button(None) ............................. 36 9.3 Display screen(None) ..........................36 9.4 Display(None) ............................

  • Page 5: Safety Warning Code

    Service Manual, 2016-12 1.Safety Warning Code 1.1Warning for operation safety 5 / 45...
  • Page 6 Service Manual, 2016-12 6 / 45...
  • Page 7 Service Manual, 2016-12 7 / 45...

  • Page 8: Safety Instruction For Refrigerant

    Service Manual, 2016-12 1.2Safety instruction for refrigerant 8 / 45...

  • Page 9: Description For Product Features

    Service Manual, 2016-12 2.Description for product features This product is provided with following features: (The picture is only for reference, and specific appearance and configuration are subject to the real product) 1） Full air cooling frost-free design 2） Electronic temperature control system with more accurate temperature control. 3）...

  • Page 10: Installation And Commissioning

    Service Manual, 2016-12 3.Installation and commissioning 3.1Handling 1) Protecttherefrigeratorinmovingit Sameasshownasleftphoto,pleasemoveitbyhandcartwi thcushion 2) Removeallpackingmaterialsandbottomcushion,then moveintohouseforplacement 3) Aftermovingittoappropriatelocation,waitfor2hoursbe forepoweron. 3.2Disassembly (None) The refrigerator door needs to be dismantled if it cannot enter the room in the whole. 3.3 Installation location Location that is easy for ventilation shall be chosen to facilitate heat dissipation, enhance its performance and reduce the energy consumption.

  • Page 11: Change The Door Opening Direction

    Service Manual, 2016-12 3.5Change the door opening direction 1、Unplug your refrigerator and remove all food from the door shelves. Remove all food from the inner door liner. Tape the door shut with masking tape. 2、 Remove the left cover plate and the right top hinge cover, then unscrew screws and remove the right top hinge.
  • Page 12 Service Manual, 2016-12 7、Remove the hole cap from the top left of the refrigerator door and insert it in the other side. 8、Remove the door block from the bottom right side of the freezer and refrigerator door and attach it to the other side.

  • Page 13: Installation Of Handle

    Service Manual, 2016-12 12、 Remove the screw caps on the door handles, then remove the four Allen-screws securing the handles to the left side of the doors with the Allen wrench. Remove the handles. 13、 Remove the four Phillips-head screws from the left side of the door.

  • Page 14: Installation Of Door Lock(None)

    Service Manual, 2016-12 (Pictures and objects are not consistent, in order to prevail in kind) ① Take out the two crisscross-screw; and install them into the door holes; turn the screws till to the bottom; Aim at screws to install the handle;The screws in the hole at the side of the handle and turn the screws till them very tight;Screw cap should be put on the screw.

  • Page 15: Terms

    Service Manual, 2016-12 4.Terms 4.1 Definition of model(None) 4.2Location of nameplate Label (The picture is only for reference, and specific appearance and configuration are subject to the real product) 15 / 45...

  • Page 16: Product Specification

    Service Manual, 2016-12 5.Product specification 5.1 Typespecification(None) 5.2 Electrical parameters Product Name SO-BCD595WM-UT UL-BCD595WM-SQ Product Code 22031020000462 22031020000113 Name Item Type Specification Specification Compressor PZ99H1C-4 E50H1B-U QP2-15/QP2-15 MPT36A04 Starter Overload protector 3TM197TF2/DRB22T61A1 4TM302TFBYY Compressor Winding resistance of Rmc:10-20Ω Rmc:10-20Ω compressor wiring Rsc:30-50Ω...

  • Page 17: Circuit Diagram

    Service Manual, 2016-12 5.5Circuit diagram 17 / 45...

  • Page 18: Internal View And Dimension

    Service Manual, 2016-12 6.Internal view and dimension 6.1Main parts and their names (The picture is only for reference, and specific appearance and configuration are subject to the real product) 1.Air duct components in freezing chamber 6.Crisper for fruit and vegetable 2Steel wire shelf 7.Regulating foot 3.Air duct components in refrigerating chamber...
  • Page 19 Service Manual, 2016-12 8 1 8 7 3 4 Down view Open Door 8 3 7 Maximum open angle of door 19 / 45...
  • Page 20 Service Manual, 2016-12 (The picture is only for reference, and specific appearance and configuration are subject to the real product) 20 / 45...

  • Page 21: Refrigerating Piping System And Circulating Route Of Cooling Air

    Service Manual, 2016-12 7.Refrigerating piping system and circulating route of cooling air 7.1 Refrigerating piping system CompressorcondenserAnti-condensation tubeDry filterCapillary tubeEvaporatorSuction tubeSuction connection tubeCompressor (The picture is only for reference, and specific appearance and configuration are subject to the real product) 21 / 45...

  • Page 22: Circulating Route Of Cooling Air

    Service Manual, 2016-12 7.2Circulating route of cooling air (The picture is only for reference, and specific appearance and configuration are subject to the real 22 / 45...

  • Page 23: Dismantling Of Parts

    Service Manual, 2016-12 8. Dismantling of parts 8.1 Parts on the door Door seal Door seal is installed into door liner groove. 1） Open the refrigerator door; 2） Take the door seal out of door liner; Door tray Lift up the bottle frame and take it out from the door liner of the refrigerator.

  • Page 24: Air Duct And Fan Motor

    Service Manual, 2016-12 1） Light of the refrigerating chamber is located upper chamberRemove the screw. 2） Loosen the hook and remove the light. Light switch There is a light switch on the side wall of the refrigerating chamber. 1） Loosen the hook with small normal screwdriver and pull out the switch until the wire connector reveals.

  • Page 25: Evaporator And Temperature Sensing System

    Service Manual, 2016-12 Damper assembly (None) Evaporator and temperature sensing system Evaporator in freezing chamber 1） Remove the air duct components in freezing chamber. 2） Disconnect all connectors. 3） Remove the welding on inlet and outlet tubes. 4） Remove two screws which are used to fix the evaporator and remove the evaporator.
  • Page 26 Service Manual, 2016-12 Defrost thermostat The defrost thermostat is located on top of the evaporator. 1） Disconnect the connector of defrost thermostat 2） Cut off the band which fixes the defrost thermostat. 3） Separate the defrost thermostat and the evaporator. *,Don’t break the welding of the evaporator in case that only the defrost thermostat needs to be replaced Defrost heater...

  • Page 27: Compressor Case

    Service Manual, 2016-12 3） Remove the thermostat knob, Disassembly all the connectors 4）Remove the thermostat temperature sersons 5 ） Replaced the thermostat, the reverse process can complete installation. Refrigerator chamber sensor None None Ambient temperature sensor Freezer sensor None 8.6Compressor case Rear cover and compressor case 用十字螺丝刀把固定压机仓后盖板的螺钉逆时针卸...
  • Page 28 Service Manual, 2016-12 1） Remove the three screws with a Phillips screwdriver and remove the motor support, motor, and fan blades. 2） Unplug the condenser fan motor terminal and remove the condenser fan motor. Terminal box of the compressor None Standby condenser None Piping system in the compressor case...

  • Page 29: Display And Main Control Panel(None)

    Service Manual, 2016-12 3. Remove the protective cover 1）Pry the protective cover slowly from the upper part, 2）Pull it out and remove it. 4. Remove the starter and protector Unplug the starter and protector (you can use a screwdriver to pry it slowly) 5.
  • Page 30 Service Manual, 2016-12 Disassembly and installation of ice maker 1) Unplug the refrigerator from the wall outlet. 2) Remove the freezer shelf and ice tray rack from the freezer. 3) Remove the plug from the inside of the freezer compartment with a putty knife. 4) Peel off the label covering the ice maker hole on the back of the refrigerator, then remove the foam from the hole with the needle nose pliers.
  • Page 31 Service Manual, 2016-12 6) Secure the water inlet tube to the back of the refrigerator with self-drilling screws (provided). 7) Squeeze together and slide the tube clamp over the fill tube. While still squeezing the clamp, insert one end of the plastic tube into the fill tube as far as it will go, then slide the clamp downward to capture the fill tube in place.
  • Page 32 Service Manual, 2016-12 11) Mount the ice maker onto the two ice maker mounting screws you installed in step 9. Make sure that the water inlet tube is sitting inside the fill cup, then tighten the screws. 12) Adjust the leveling bracket to level the ice maker. The ice maker is level when the gap between the freezer wall and the ice maker is the same at the top and bottom.
  • Page 33 Service Manual, 2016-12 15) Connect the wiring harness to the water valve, making sure that the connection is tight. 16) Grasp the other end of the plastic tube and push it firmly into the quick-connection on the valve until it bottoms out. 17) Clean the back of the cabinet with a commercial household cleaner, ammonia, or alcohol before applying the clamps.
  • Page 34 Service Manual, 2016-12 the OFF position.  Do not install the ice maker tubing in areas where temperature falls below freezing.  When using any electrical devices (such as power drill) during installation, be sure the device is double insulated or grounded in a manner to prevent the hazard of electric shock, or is battery powered. ...
  • Page 35 Service Manual, 2016-12 9) Place the end of the water supply line into a sink or bucket and flush the water supply line with water until the water runs clear. 10) Unscrew the plastic cap from the water inlet valve and discard it.

  • Page 36: Function And Operation

    Service Manual, 2016-12 9. Function and operation Operation panel 1.Of the initial position is arranged on the 3 gear, frozen door in COLDER position. 2.Environmental temperature long time less than 10 degrees, cold storage control panel recommended gear placed in the 4 grade or 5 files, frozen door is placed in the COLDEST position. 3.Long time if the ambient temperature is higher than 43 degrees, cold storage control panel recommended gear placed in the 4 grade or 5 files, refrigerated air door can be adjusted in the COLDER to COLDEST region.

  • Page 37: Circuit Description

    Service Manual, 2016-12 10.Circuit description 10.1 Power Supply (None) 10.2Door trip test circuit(None) 10.3Temperature test circuit (None) 10.4Fan motor circuit of the freezing chamber (None) 10.5Refrigerator fan motor circuit (None) 10.6Condensing fan motor circuit (None) 10.7Damper motor circuit (None) 10.8Resistance value of the sensor (R/T) (None) 11.Troubleshooting Method 11.1 No refrigeration 37 / 45...

  • Page 38: Compressor Failure

    Service Manual, 2016-12 11.2 Compressor failure 38 / 45...

  • Page 39: Defrosting Is Not Working

    Service Manual, 2016-12 11.3 Defrosting is not working 39 / 45...

  • Page 40: Fan In The Freezing Chamber Is Abnormal

    Service Manual, 2016-12 11.4 Fan in the freezing chamber is abnormal Refer to this method for other fans. 40 / 45...

  • Page 41: Damper Is Abnormal(None)11.6 Lights Inside The Refrigerator Dont Light Up

    Service Manual, 2016-12 11.5 Damper is abnormal(None)11.6 Lights inside the refrigerator dont light up 12. Figures and details of repair parts( Documents are provided separately 12.1 Figure 12.2 List of parts and components 13Appendix: 13.1Electrical Schematic Diagram(None) (Model:***) 41 / 45...

  • Page 42: Refrigerator Maintenance Tooling And Equipment And Material

    Service Manual, 2016-12 13.2refrigerator maintenance tooling and equipment and material Tooling Name Photo Main Usage Phillips screwdriver screw assemble and disassemble screw and rivet assemble and slotted screwdriver/scraper disassemble hinge and compressor screw Socket spanner 5/16″ assemble and disassemble display panel and air duct Sucker cover disassemble handle assemble and...
  • Page 43 Service Manual, 2016-12 Pipe cutter pipe cutting Knife assistive tool Nipper pliers assistive tool Capillary tube scissors Shear capillary Equipment Name Photo Main Usage Vacuum pump vacuum pumping Electronic scale weighing refrigerant/gas 43 / 45...
  • Page 44 Service Manual, 2016-12 pipe and cooling High pressure nitrogen with system(condenser, evaporator, piezometer etc) impurities clean Soldering gun heating and welding connection process Quick coupling pipelinevacuumorchargerefriger antwillbeused. welding point leakage detect, if hand leak detector no, use soap-suds material Name Photo Main Usage Process pipeline...
  • Page 45 Refrigerant/gas Add refrigerant to the system door fixing for reversible door Sealing tape option Midea Refrigerators If you need to get detailed technical information from the manufacturer, please contact: xxx@midea.com Refrigeration Division Overseas Sales Company Address: No. 176, Jinxiu Avenue, Economic-Technological Development Area, Hefei, Anhui, China...

This manual is also suitable for:

Ul-bcd595wm-sqRf2105ss2203102000046222031020000113

Table of Contents